Corn Stalk Pellet Machine

corn stalk pellet machine-banner

What Is a Corn Stalk Pellet Machine

A corn stalk pellet machine compacts corn stalk raw materials into uniform pellets of consistent length. Its working principle is simple: the ring die and pressure rollers press the loose material into shape. Then a cutter cuts the material evenly.

RICHI corn stalk pellet making machines meet relevant CE compliance requirements. They have reliable quality. We can configure complete production lines based on raw material conditions and capacity needs.

Pellet Diameter

Demonstration of Corn Stalk Pelletizing
Uses of Biomass Fuel
Uses of Feed for Ruminants
Uses for Animal Bedding
Uses of Organic Fertilizer Granules

Corn Stalk Pellet Machine Design Highlights

We consider every detail when we design and manufacture the corn stalk pelletizer. We pay special attention to key parts that handle corn stalks. This helps the whole machine run smoothly and stably.

RICHI Corn Stalk Pellet Machine
Feeding inlet of a corn stalk pelletizing machine

Feeding Port

The opening is larger than that of ordinary feed pellet machines. It can handle larger corn stalk raw materials. It also has an arch-breaking feeder. The feeder prevents material bridging and blocking.

Forced Feeder for Corn Stalk Pelletizing Machine

Forced Feeder

An electric motor drives the forced feeder. It forces light corn stalks into the pelleting chamber. This avoids poor material flow and blockages.

Pelletizing chamber of a corn stalk pellet mill

Pelleting Chamber

The pelleting chamber contains three key parts: ring die, pressure roller, and cutter. The ring die and pressure rollers squeeze material out through ring die holes. The cutter cuts the extruded material into uniform lengths.

Exhaust port of a corn stalk pellet mill

Exhaust Port

When corn stalks are compressed, friction generates heat. Moisture in the material becomes steam. Dust also forms. Steam and dust exit from here.

Safety pin for corn stalk pellet mill

Safety Pin

The safety pin breaks automatically when the corn stalk pellet machine runs under overload. This triggers the protection mechanism and forces the machine to stop. It protects the equipment.

Motor for corn stalk pelletizing machine

Motor

The motor gives the whole machine enough power. It ensures full compression of corn stalks. It prevents stalling and slipping. It ensures good pellet forming.

3 T/H Corn Stalk Pellet Machine in Brazil

Raw material: corn stalks

Pellet diameter: 8 mm

The customer wanted to process collected corn stalks into low-density compacted bedding. This bedding needed easy storage, transport, and spreading. For this use, we selected an 8 mm die for the customer. We focused on adjusting pellet compactness. The pellets should not loosen or powder easily. They also should not be too hard or scratch animals.

3 T/H Corn Stalk Pellet Machine in Argentina

Raw materials: corn stalk powder, alfalfa meal, corn flour, soybean meal

Pellet diameter: 8 mm

The customer bought this corn stalk pellet machine to make cattle feed pellets. We added a conditioner for the customer. It fully gelatinizes and cooks the raw materials. The finished pellets have much better palatability than pellets made by simple pressing.

1-2 T/H Corn Stalk Pellet Machine in Mexico

Raw materials: corn stalk powder, hay powder, wheat bran

Pellet diameter: 6 mm

The customer needs to process corn stalk pellets in batches according to orders from nearby farmers. So the customer values easy daily operation and adjustment of the corn stalk pellet making machine. We provided systematic training. It helps the customer arrange production tasks reasonably.

3-4 T/H Corn Stalk Pellet Machine in South Africa

Raw materials: corn stalk powder, alfalfa meal, wheat bran, soybean meal

Pellet diameter: 8 mm

This project needs to process many feed orders in a concentrated way. The customer cares about the load capacity of the corn stalk pelletizer. During trial runs, we focused on observing current and pellet output. We confirmed a suitable feeding speed for the customer.

2 T/H Corn Stalk Pellet Machine in Ukraine

Raw material: corn stalks

Pellet diameter: 8 mm

The customer buys waste corn stalks from farmers. They process the stalks into biomass fuel pellets for heating boilers. Pellets from the corn stalk pellet maker are hard and do not loosen easily. This helps solve the local clean energy supply problem.

1.8-2 T/H Corn Stalk Pellet Machine in India

Raw materials: decomposed corn stalks (with a small amount of livestock and poultry manure)

Pellet diameter: 4 mm

The customer is a farmer. They ferment and decompose corn stalks to make organic fertilizer pellets. They use the pellets on field crops and cash crops. The corn stover pellet machine effectively reduces the customer’s cost of buying chemical fertilizer.

Corn Stalk Bale Breaker
Corn Stalk Crusher
Corn Stalk Dryer
Corn Stalk Pelleting Machine
Corn Stalk Pellet Cooler
Corn Stalk Pellet Screening Machine
Corn Stalk Pellet Packing Scale
  • Raw material crushing size is not fine enough.
  • Moisture of corn stalk raw materials fluctuates greatly.
  • Wear parts in the corn stalk pellet machine have worn out.
  • Feed speed is unstable.
  • Motor voltage is insufficient.
RICHI Factory
Qualification Certificate
email
whatsapp
Get Quote!
Scroll to Top